This is a test script for the release of Reveal 3.2.0. <If there are steps missing from this script, please update the master template. Please copy this for each round of testing you do.>
...
Step | Detail | Expected Result / Pass Criteria Update for each workflow/feature.
(List criteria and primary verification method: “Manual”, will need notes and observations taken against criteria. “Auto” should be tested n automated testing but notes should be taken if fail in manual testing) | Pass? Complete for each iteration/run of workflow.
(Y/N)
| Notes. Complete for each iteration/run of workflow. Include details on which user used, which family registered, and capture initial bug notes. |
|---|---|---|---|---|
User | Login | Manual - existing username and password should login successfull | Y | username use: bvbd_mhealth |
Location | Select in hamburger menu | Manual - After login locations should load. Select one. OAs loads immediately the app is loaded. | Y | Thailand test site BVBD 1 |
Plan | Select in hamburger menu | Manual - Plans available for the area should load ( observed fastest load takes about 30 seconds, highly network dependent) | Y | A1 Thailand test site BVBD 1 2020-02-06 RMK release 3.2.0 testing plan. |
Add location 1 | Add a new residential structure | Added structure should appear on the map in yellow | Y | |
Mark location as inactive 1 | Long press and mark as inactive. | Mark location inactive confirmation pop up should show. | Y | |
Confirm location is inactive | Check map view - structure should be grey and cannot tap on it. Should not appear on list view. Check the web dashboards and confirm the location is no longer counted. | Structure turned grey. When tapped a pop up shows notifying the user the structure has no tasks for the plan. XXXXXX | Y N | Repeated on 5 structures and 2 structures that were previously added from other plans.. The dashborad showed 2 of 22 structures progress for family registration. Even after marking some structures as inactive, the denominator did not change despite synic multiple times and the mobile client indicated syncing was complete. ( This observation was withing a period of 5 minutes.) |
Add location 2 | Add a new mosquito collection point | Added structure appeared point appearing on the map with correct icon | Y | structure name: Sangenjo |
Mark location as inactive 2 | Long press and mark as inactive | Mark location inactive confirmation pop up should show. | Y | |
Confirm location is inactive | Check map view - structure should be grey and cannot tap on it. Should not appear on list view. Check the web dashboards and confirm the location is no longer counted. | Structure turns grey XXXX | Y N | newly added not reflecting on dashboard after syncing and observing for 5 minutes. To be updates after its verified. |
Add location 3 | Add a new breeding site | Added structure showing on map with correct icon. | Y | |
Mark location as inactive 3 | Long press and mark as inactive | Mark location inactive confirmation pops up. | Y | |
Confirm location is inactive | Check map view - structure should be grey and cannot tap on it. Should not appear on list view. Check the web dashboards and confirm the location is no longer counted. | Point turns grey XXXXX | Y N | 3 larva sites before adding 2 new ones and syncing, observed for 5 minutes. data not reflecting on dashboard. To be revisited and updated later after data sycs. |
Add location 4 | Add a new PAOT | added point show on map | Y | |
Mark location as inactive 4 | Long press and mark as inactive | Mark location inactive confirmation pops up. | Y | |
Confirm location is inactive | Check map view - structure should be grey and cannot tap on it. Should not appear on list view. Check the web dashboards and confirm the location is no longer counted. | Point turn grey Indicator not on the web UI yet. To be revisited. | Y | |
Mark already-there location but with no data entered as inactive. | Long press one of each location type that is already enumerated and mark as inactive | Residential structure turns grey. Mosquito collection point turns grey Larval breeding site point turns grey PAOT point turns grey | Y Y Y Y | |
Verify location with data cannot be marked inactive | Long press one of each location type with task info already collected confirm you are unable to mark as inactive. | |||
...