This is a test script for the release of Reveal 3.2.0. <If there are steps missing from this script, please update the master template. Please copy this for each round of testing you do.>
...
Step | Detail | Expected Result / Pass Criteria Update for each workflow/feature.
(List criteria and primary verification method: “Manual”, will need notes and observations taken against criteria. “Auto” should be tested n automated testing but notes should be taken if fail in manual testing) | Pass? Complete for each iteration/run of workflow.
(Y/N)
| Notes. Complete for each iteration/run of workflow. Include details on which user used, which family registered, and capture initial bug notes. |
|---|---|---|---|---|
User | Login | Manual - existing username and password should login successfull | Y | username use: bvbd_mhealth |
Location | Select in hamburger menu | Manual - After login locations should load. Select one. OAs loads immediately the app is loaded. | Y | Thailand test site BVBD 1 |
Plan | Select in hamburger menu | Manual - Plans available for the area should load ( observed fastest load takes about 30 seconds, highly network dependent) | Y | A1 Thailand test site BVBD 1 2020-02-06 RMK release 3.2.0 testing plan. |
Add location 1 | Add a new residential structure | Added structure should appear on the map in yellow | Y | |
Mark location as inactive 1 | Long press and mark as inactive. | Mark location inactive confirmation pop up should show. | Y | |
Confirm location is inactive | Check map view - structure should be grey and cannot tap on it. Should not appear on list view. Check the web dashboards and confirm the location is no longer counted. | Structure turned grey. When tapped a pop up shows notifying the user the structure has no tasks for the plan. XXXXXX | Y N | Repeated on 5 structures.. The dashborad showed 2 of 22 structures progress for family registration. Even after marking some structures as inactive, the denominator did not change despite synic multiple times and the mobile client indicated syncing was complete. ( This observation was withing a period of 5 minutes.) |
Add location 2 | Add a new mosquito collection point | Added point appearing on map with correct icon | Y | structure name: Sangenjo |
Mark location as inactive 2 | Long press and mark as inactive | Mark location inactive confirmation pop up should show. | Y | |
Confirm location is inactive | Check map view - structure should be grey and cannot tap on it. Should not appear on list view. Check the web dashboards and confirm the location is no longer counted. | Structure turns grey XXXX | Y N | newly added not reflecting on dashboard after syncing and observing for 5 minutes. To be updates after its verified. |
Add location 3 | Add a new breeding site | Added structure showing on map with correct icon. | Y | |
Mark location as inactive 3 | Long press and mark as inactive | Mark location inactive confirmation pops up. | Y | |
Confirm location is inactive | Check map view - structure should be grey and cannot tap on it. Should not appear on list view. Check the web dashboards and confirm the location is no longer counted. | Point turns grey XXXXX | Y N | 3 larva sites before adding 2 new ones and syncing, observed for 5 minutes. data not reflecting on dashboard. To be revisited and updated later after data sycs. |
Add location 4 | Add a new PAOT | added point show on map | Y | |
Mark location as inactive 4 | Long press and mark as inactive | Mark location inactive confirmation pops up. | Y | |
Confirm location is inactive | Check map view - structure should be grey and cannot tap on it. Should not appear on list view. Check the web dashboards and confirm the location is no longer counted. | Point turn grey Indicator not on the web UI yet. To be revisited. | Y | |
Mark already-there location but with no data entered as inactive. | Long press one of each location type that is already enumerated and mark as inactive | Residential structure turns grey. Mosquito collection point turns grey Larval breeding site point turns grey PAOT point turns grey | Y Y Y Y | |
Verify location with data cannot be marked inactive | Long press one of each location type with task info already collected confirm you are unable to mark as inactive. | Residential structures does not allow marking as inactive. Mosquito collection point does not allow marking as inactive. Larval breeding site point does not allow marking as inactive. PAOT point does not allow marking as inactive. | Y Y Y Y | |
RVL-11: Marking task ineligible IN PROGRESS
Step | Detail | Expected Result / Pass Criteria Update for each workflow/feature.
(List criteria and primary verification method: “Manual”, will need notes and observations taken against criteria. “Auto” should be tested n automated testing but notes should be taken if fail in manual testing) | Pass? Complete for each iteration/run of workflow.
(Y/N) | Notes. Complete for each iteration/run of workflow. Include details on which user used, which family registered, and capture initial bug notes. |
|---|---|---|---|---|
User | Login | Manual - existing username and password should login successfull | Y | username use: bvbd_mhealth |
Plan | Select in hamburger menu | Manual - After login locations should load. Select one. OAs loads immediately the app is loaded. | Y | Thailand test site BVBD 1 |
Location | Select in hamburger menu | Manual - Plans available for the area should load ( observed fastest load takes about 30 seconds, highly network dependent) | Y | A1 Thailand test site BVBD 1 2020-02-06 RMK release 3.2.0 testing plan. |
Select household | Tap a yellow household structure. Verify that first question to display asks about if the structures is eligible (mark as not eligible) and why not if not. | Mark location Ineligible pop up appears | Y | out of the available options, selected Not Eligible: Currently Unoccupied, that saved and the structure on the map turned grey. |
Confirm skip logic | Review the data dictionary and check that all downstream skip logic is appropriate (if not eligible, all other fields should hide) | |||
Submit form/Confirm | Tap submit, save form (when an eligible house). | |||
Check card | Select the structure on the map. Confirm card view. | Card should display not eligible | Y | |
...