Reuben Feb 7 Release 3.2.0 test scripts

Login

Manual - existing username and password should login successfull

Y

username use: bvbd_mhealth

Select in hamburger menu

Manual - After login locations should load. Select one. OAs loads immediately the app is loaded.

Y

Thailand test site BVBD 1

Select in hamburger menu

Manual - Plans available for the area should load ( observed fastest load takes about 30 seconds, highly network dependent)

Y

A1 Thailand test site BVBD 1 2020-02-06 RMK release 3.2.0 testing plan.

Add a new residential structure

Added structure should appear on the map in yellow

Y

Long press and mark as inactive.

Mark location inactive confirmation pop up should show.

Y

Check map view - structure should be grey and cannot tap on it. Should not appear on list view.

Check the web dashboards and confirm the location is no longer counted.

Structure turned grey. When tapped a pop up shows notifying the user the structure has no tasks for the plan.

XXXXXX

Y

N

Repeated on 5 structures..

The dashborad showed 2 of 22 structures progress for family registration.

Even after marking some structures as inactive, the denominator did not change despite synic multiple times and the mobile client indicated syncing was complete. ( This observation was withing a period of 5 minutes.)

Add a new mosquito collection point

Added point appearing on map with correct icon

Y

structure name: Sangenjo

Long press and mark as inactive

Mark location inactive confirmation pop up should show.

Y

Check map view - structure should be grey and cannot tap on it. Should not appear on list view.

Check the web dashboards and confirm the location is no longer counted.

Structure turns grey

XXXX

Y

N

newly added not reflecting on dashboard after syncing and observing for 5 minutes. To be updates after its verified.

Add a new breeding site

Added structure showing on map with correct icon.

Y

Long press and mark as inactive

Mark location inactive confirmation pops up.

Y

Check map view - structure should be grey and cannot tap on it. Should not appear on list view.

Check the web dashboards and confirm the location is no longer counted.

Point turns grey

XXXXX

Y

N

3 larva sites before adding 2 new ones and syncing, observed for 5 minutes. data not reflecting on dashboard. To be revisited and updated later after data sycs.

Add a new PAOT

added point show on map

Y

Long press and mark as inactive

Mark location inactive confirmation pops up.

Y

Check map view - structure should be grey and cannot tap on it. Should not appear on list view.

Check the web dashboards and confirm the location is no longer counted.

Point turn grey

Indicator not on the web UI yet. To be revisited.

Y

Long press one of each location type that is already enumerated and mark as inactive

Residential structure turns grey.

Mosquito collection point turns grey

Larval breeding site point turns grey

PAOT point turns grey

Y

Y

Y

Y

Long press one of each location type with task info already collected confirm you are unable to mark as inactive.

Login

Select in hamburger menu

Select in hamburger menu

Tap a yellow household structure. Verify that first question to display asks about if the structures is eligible (mark as not eligible) and why not if not.

Review the data dictionary and check that all downstream skip logic is appropriate (if not eligible, all other fields should hide)

Tap submit, save form (when an eligible house).

Select the structure on the map. Confirm card view.

Login

Select in hamburger menu

Select in hamburger menu

Select a household that is already registered with tasks incomplete

Navigate to task tab and select blood screening task. Verify that first question asks about eligibility, and the default value is ‘yes’. Mark as ineligible.

Review the data dictionary and check that all downstream skip logic is appropriate (if not eligible, all other fields should hide)

Tap save form

Confirm that task button is black and reads ‘ineligible’

Note, though scoped to read ‘ineligible’ this reads ‘not eligible’ which should also be acceptable.

Repeat steps above but register a household and members from scratch

Login

Select in hamburger menu

Select in hamburger menu

Select a household that is already registered with tasks incomplete

Navigate to task tab and select blood screening task. Verify that first question asks about eligibility, and the default value is ‘yes’. Proceed to answer the other questions.

• Select the type of blood screening.

• Select if person has slept outside within the past two weeks.

• Select if the person was testing or not.

• Select if the person was tested or not.

Review the data dictionary and check that all downstream skip logic is appropriate. Select the appropriate answer to the question on testing.

1. if NO, the only question should be asking why the person was not tested. Select the reason why the person was not texted.

2. If YES, the next question about the type on test will show. Select the type of test used.

3. If MICROSCOPY, a question requiring the slide number and results follows. Pick the the applicable results.

4. If RDT, the RDT result question will follow. Pick the appropriate answer.

Tap save form

Confirm that task button has green text which reads ‘COMPLETE’

Repeat steps above but register a household and members from scratch

Login

Select in hamburger menu

Select in hamburger menu

Select a household that is already registered with tasks incomplete.

Navigate to task tab and select bednet task. Verify that first question asks about eligibility, and the default value is ‘yes’. Mark as ineligible.

Review the data dictionary and check that all downstream skip logic is appropriate (if not eligible, all other fields should hide)

Tab submit, save form

Confirm that task button is black and reads ‘ineligible’

Note, though scoped to read ‘ineligible’ this reads ‘not eligible’ which should also be acceptable.

Repeat steps above but register a household and members from scratch

Login

Select in hamburger menu

Select in hamburger menu

Select a household that is already registered with tasks incomplete.

Navigate to task tab and select bednet task. Verify that first question asks about eligibility, and the default value is ‘yes’. Mark as ineligible.

Review the data dictionary and check that all downstream skip logic is appropriate (if not eligible, all other fields should hide)

Tab submit, save form

Confirm that task button is black and reads ‘ineligible’

Note, though scoped to read ‘ineligible’ this reads ‘not eligible’ which should also be acceptable.

Repeat steps above but register a household and members from scratch

Login

Select in hamburger menu

Select in hamburger menu

Select a household with multiple members

Select a non family head household member that has no tasks complete, so you navigate to the screen for that member

Tab the three dot menu in the upper right, select ‘archive member’ and ‘confirm’.

Go to family member view and confirm that member no longer appears

Confirm web UI and holding tables update.

Repeat above steps. Confirm business logic changes as necessary.

Navigate to the member page for the household held and confirm that the option to Archive is not available.

Login

Select in hamburger menu

Select in hamburger menu

Select a household

From the family list view, tap the three dot menu in the upper right, select ‘archive household’ and ‘confirm’.

Confirm that the structure appears as yellow in both views

Confirm web UI and holding tables update.

Tap the structure and complete a new family registration. Complete all tasks against that structure and confirm it behaves as expected.